Installing Windows XP ISO from USB is one of those processes that can get the best in sweat. Not that the process is too tricky or elongated. It’s just that not many people are aware of how it commences, proceeds and finishes. These ambiguities give people a ton of reasons to refrain from initiating the Windows XP ISO installation process. But don’t worry. On this page we will provide you all the help that you need. So, buckle up and read on to find out how to install windows XP ISO from USB.
But first, here’s the link to Download Windows XP ISO.
Step-by-Step Procedure to Install Windows XP ISO From USB!
As referenced above, introducing Windows XP from the ISO records can be problematic. It tends to be truly maddening for the individuals who are new to taking care of these documents. Experiencing and following the means beneath will most likely support you.
On the off chance that despite everything you end up lost, you can watch the video that we are implanting here.
Step 1: Prepare The Rescue USB Drive
- Download PowerISO rescue media utility and Run it. (If you are using Windows Vista or newer OS, you will have to confirm the UAC dialog to continue).
- Insert the Windows XP USB Drive.
- Now the utility will ask you to choose Windows PE architecture and version.
- The suggested one is 32-bit architecture and Windows PE 3.11.
- After you make a choice, click Next.
- Now, select USB drive for output device and select the correct drive from the list. Then click Next to continue.
- The software will now create a USB rescue drive. This drive will check necessary components and download the missing components from server. Note that all this existing data on the USB drive will be destroyed if you follow this step.
This tool will notify you before writing the USB drive. What you need to do is click “OK” to continue.
- Now copy the Windows XP ISO files to the USB. Ensure that there is i386 folder. You will need it.
All done? Cool. Now just look around for any errors and once confirmed, move ahead.
Step 2: Configure The BIOS
Now you need to reboot the system and get into the BIOS configuration to boot from USB.
To do the same, just follow the steps below.
- Reboot the system.
- When the system is being reboot, you need to enter BIOS configuration. In order to do that you can simply hit F1, F2, Delete or Escape. If you have doubts, the same key instructions will be there on the screen.
- Now, move to the section containing your boot devices.
- Provided that your USB device is added, it will be displayed on the screen. If your device isn’t listed on the screen, it might be due to your system not supporting booting from USB.
And if it is visible, you need to promote your USB device to the primary boot device.
- Save all changes and exit the BIOS configuration.
Important Note: Be very careful while carrying out the entire process. If anything goes wrong, you may end up bricking down your computer.
Step 3: Boot From Rescue USB Drive
If you have carefully followed the entire process in the above sections, your computer should now be booting up from the rescue USB drive. In case if any issues crop up, check for the following processes.
- Is your BIOS properly configured for booting from the USB device? (Is the USB device listed and does it have top priority?)
- Have you correctly prepared the USB drive in step one? (Restart the procedure.)
- Does your USB drive properly support being booted from? (Try another one!)
Step 4: Prepare the Hard Disk
The next thing you need to make sure is that your hard disk is ready for the process. This means that you have to have partitions on the hard disk. It becomes more important when you are using Linux or any other operating system on your PC.
To ensure successful partition of your hard drive, you can follow the steps below.
- Click the icon on task bar to launch a command line Window.
- Enter DiskPart to run the built-in disk management utility.
- Enter the commands needed to re-partition and format your drive. For example, try the following:-select disk 0 (select the first disk. On your computer, disk 0 may not be the correct disk, you can use “list disk” to find the correct disk.)
-clean (purges the entire drive, essentially resetting it)
-create partition primary (creates a single partition from the entire disk)
-select partition1 (select the partition created)
-format fs=ntfs quick (format the partition to NTFS system, and do a quickly format)
-assign (assign the partition a drive letter)
-exit (quits DiskPart).n/post-new.php
Step 5: Launch the Windows XP ISO Setup From USB Drive
Done by now? Wonderful. Now follow the steps below to successfully launch the Windows XP ISO setup from your USB drive.
Note: At this moment, you can’t plug in a new USB device. Even if you do, it won’t work. All the required USB devices will have to be plugged in from the very start only.
Run the following command:
- Run E:\i386\winnt32.exe /syspart:C: /tempdrive:C: /makelocalsource. Replace C: with the drive you want to install Windows to.
- Move on with installation. Don’t convert the installation volume to NTFS. The setup program incorrectly believes that your USB drive (if is formatted as FAT) needs conversion. Turns out, it doesn’t.
Now the program will close and you will have to follow the next steps.
Step 6: Setup Windows XP From Hard Disk
- Restart your PC.
- Pull the USB device out.
- Change your BIOS settings back to boot from hard disk again.
- Simply continue to finishing the new Windows XP Setup.
This will install your Windows XP ISO on your system. Still in doubt about how the process went on? The following video may help you.
Video Guide to Help You Install Windows XP ISO From USB Drive
As not everyone likes reading and following, here’s a video for those who want to watch and follow. Watch the video below to know how to install Windows XP ISO from USB device.
I believe this will help you.
So, this was all about installing windows XP ISO from USB Drive. Hopefully this was helpful.